[[PageOutline]] == Project Number == 1925 == Project Title == Adopt-A-GENI: Bringing Users into the GENI Community [[BR]] a.k.a. AAG === Technical Contacts === '''PI''' Zongming Fei, University of Kentucky (mailto:fei@netlab.uky.edu) [[BR]] '''Co-PI''' James Griffioen, University of Kentucky (mailto:griff@netlab.uky.edu) [[BR]] '''Co-PI''' Kobus Van der Merwe, University of Utah (mailto:kobus@cs.utah.edu) [[BR]] '''Co-PI''' Robert Ricci, University of Utah (mailto:ricci@cs.utah.edu) [[BR]] === Participating Organizations === University of Kentucky [[BR]] University of Utah [[BR]] === GPO Engineer === '''GPO GENI Architect:''' [https://www.geni.net/?page_id=2080 Marshall Brinn] == Scope == This project will make it easy to incorporate SDN network resources into GENI by developing automated services that make it easy for experimenters to route and send their traffic across SDN switches in their slice. Experimenters using standard routing paths should be able to do this without any knowledge of OpenFlow rules. [[BR]] == Project Technical Documents == === Quarterly Status Reports === [wiki:AAG/aag_post_gec19_report AAG post GEC19 Report March 2014][[BR]] [wiki:AAG/aag_post_gec20_report AAG post GEC20 Report July 2014][[BR]] [wiki:AAG/aag_post_gec21_report AAG post GEC21 Report October 2014][[BR]] [wiki:AAG/aag_post_gec22_report AAG post GEC22 Report March 2015][[BR]] [wiki:AAG/aag_post_gec23_report AAG post GEC23 Report June 2015][[BR]] [wiki:AAG/aag_2nd_year_report AAG Second Year Report August 2015][[BR]] [wiki:AAG/aag_final_report AAG Final Report][[BR]]