Subject: Re: ERM questions From: "Michael S. Wang" Date: 11/1/2011 5:08 PM To: Luisa Nevers CC: bergman@ee.columbia.edu, Harry Mussman , Heidi Picher Dempsey Hi Luisa, I've uploaded the ERM wiki with two new files: 1. ERM-Simulator.v.1.zip 2. GENI-ERM-NetFPGA.zip Hope this helps. Thanks! Warm regards, Michael On Mon, Oct 24, 2011 at 12:00 PM, Luisa Nevers wrote: Hi Michael, Thank you for the quick response. No rush, good luck on your midterm. Luisa On 10/24/2011 11:56 AM, Michael S. Wang wrote: > Hi Luisa, > > Thanks for the feedback. I have updated the descriptions of the two packages on the ERM wiki (based on your previous email). > > I will address the others changes by Wednesday as I have a midterm tomorrow evening that I have to prepare for right now. > > Thanks! > > Warm regards, > Michael > > On Mon, Oct 24, 2011 at 11:39 AM, Luisa Nevers wrote: > > Hello Michael, > > I have reviewed both packages and here is feedback for the READMEs. As noted earlier, > I am not able to test the setup, so can only comment on instructions. > > geni_umf_v3_3pin package: > ======================= > 1. Minor. The README_ERM_Updated.txt "Getting started with Design" section uses the > project name "reference_nic", it is probably a well known term, but it should be explicitly > mapped to the geni_umf_v3_3pin project. > > 2. In the same section the directories descriptions do not match what is delivered in > the package: > - README states "The src directory is empty". In the package, the directory > contains these files: crypto.v, crypto.v~, user_data_path.v user_data_path.v~. > - README states "The sw directory is empty". In the package there is no "sw" delivered. > - README states "There is one file under include". In the package there are two files > "crypto_defines.v" and "dev_id.v" in addition to "lib_modules.txt" > > GENI 10 Simulations 2 Package: > ========================= > 3. Readme does not provide an overview that explains the scope of the package. > > 4. The "Running the simulator" section does not explain about the simulator, > and it does not list which simulator the files can be used in. Should include > Simulator name and version. > > Luisa > > > On 10/24/2011 10:07 AM, Luisa Nevers wrote: >> Hello Michael, >> >> Thank you for attaching the 2 packages to the GENI wiki page. I do not see >> any changes to the GENI ERM page that describes the packages and their >> relevance. It would be helpful to add text to describe each. >> >> I will start reviewing the two packages this morning and will get feedback to you. >> >> About the email failure, if possible, could you forward me one of the failure >> notifications. We have been experiencing some filtering issues, and if the >> failures are related, I could get our support group to address it. >> >> Thank you, >> Luisa >> >> >> >> On 10/22/2011 8:37 PM, Michael S. Wang wrote: >>> >>> Hi Luisa, >>> >>> I've uploaded a new simulation zip file onto the ERM GENI wiki. >>> >>> >>> It is called GENI_10_Simulations_2.zip. >>> >>> It contains a readme file that describes how to use the simulation. >>> >>> Items 2-4 will be addressed by today as well. >>> >>> >>> Sorry if you got several emails on this. My email system keeps sending me "failure notifications" when I try to send to you. >>> >>> Warm regards, >>> Michael >>> >>> On Thu, Oct 20, 2011 at 9:55 AM, Luisa Nevers wrote: >>> >>> Hello Micheal, >>> >>> Sorry about the delay, I finally got a chance to start checking out this deliverable and >>> have several questions. >>> >>> 1. I have looked at the ERM_Final_Report_Sep11.doc document and do not seen any >>> usage/installation information. What should I use as documentation to use the >>> simulation? >>> >>> 2. I may not be able to use the NETFPGA code, due to lack of equipment, but I >>> expect I should be able to build it, right? I have unpacked it, and found that >>> the README.txt only describes the directory structure of the NETFPGA code and how >>> the of the deliverable (geni_umf_v3_3pin) fits into that structure. Is there >>> documentation for building this module? >>> >>> 3. Unpacking the geni_umf_v3_3pin.rar file creates approximately 200 files (no directories) >>> at the top level. How does this map to the structure that is in the README.txt? >>> >>> 4. When using unrar to unpack the geni_umf_v3_3pin.rar file, there is around >>> a dozen prompt to overwrite existing files. Why is taking place? >>> >>> Thanks, >>> Luisa >>> >>> >>> On 10/13/2011 10:30 PM, Michael S. Wang wrote: >>>> Hi Luisa, >>>> >>>> The source code for the ERM project can be found on the GENI ERM wikipage (http://groups.geni.net/geni/wiki/Embedded%20Real-Time%20Measurements). >>>> >>>> Under the attachment section, please download the two files: >>>> >>>> 1. GENI_10_Simulations.zip >>>> 2. geni_umf_v3_3pin.rar >>>> >>>> Furthermore, the file ERM_Final_Report_Sep11.docx will provide a summary of the entire project and explanations of the code release. >>>> >>>> Please let me know if you need anything else. Thanks! >>>> >>>> Warm regards, >>>> Michael >>>> >>>> >>>> On Fri, Oct 7, 2011 at 11:35 AM, Keren Bergman wrote: >>>> >>>> >>>> Hi Mike, >>>> Please respond to them with the link to our ERM release >>>> -----Original Message----- >>>> From: Luisa Nevers [mailto:lnevers@bbn.com] >>>> Sent: Friday, October 07, 2011 10:28 AM >>>> To: Luisa Nevers >>>> Subject: GENI Integration Release 3.2 Candidates >>>> >>>> Hello GENI PI, >>>> >>>> You are receiving this email because your project has a software >>>> milestone due within the GENI Spiral 3 Integration Release 2 (GIR3.2) >>>> time frame. This is the final reminder for GENI Spiral 3. Make sure to >>>> reply with your software release information if you want to be included >>>> in the GEC12 list of projects that made Spiral 3 software >>>> deliverables. Please let me know how to access both the software and >>>> its supporting documentation. >>>> >>>> The GIR 3.2 effort focuses on software released after March 31, 2011. >>>> For more information about the GIR efforts, please see >>>> Spiral3_GIR_Guidelines.pdf available at: >>>> http://groups.geni.net/geni/wiki/GpoDoc#GENISpiral3IntegrationReleaseGuideli >>>> nes >>>> >>>> >>>> For a detailed list of software milestones being considered for GIR3.2, >>>> see the full list at: >>>> http://groups.geni.net/geni/wiki/GIR3_2_candidates >>>> >>>> Thank You! >>>> Luisa Nevers >>>> >>>> >>>> >>>> >>> >>> >> > >