GIR3.2_ERM: ERM-feedback-20111020.txt

File ERM-feedback-20111020.txt, 3.3 KB (added by lnevers@bbn.com, 12 years ago)
Line 
1Subject:
2ERM questions
3From:
4Luisa Nevers <lnevers@bbn.com>
5Date:
610/20/2011 9:55 AM
7To:
8"Michael S. Wang" <michael.s.wang.38@gmail.com>
9CC:
10bergman@ee.columbia.edu, Harry Mussman <hmussman@bbn.com>, Heidi Picher Dempsey <hpd@bbn.com>
11BCC:
12Luisa Nevers <lnevers@bbn.com>
13
14Hello Micheal,
15
16Sorry about the delay, I finally got a chance to start checking out this deliverable and
17have several questions.
18
191. I have looked at the ERM_Final_Report_Sep11.doc document and do not seen any
20    usage/installation information.  What should I use as documentation to use the
21    simulation?
22
232.  I may not be able to use the NETFPGA code, due to lack of equipment, but I
24    expect I should  be able to build it, right?  I have unpacked it, and found that
25   the README.txt only describes the directory structure of the NETFPGA code and how
26   the of the deliverable (geni_umf_v3_3pin) fits into that structure.  Is there
27   documentation for building this module?
28
293. Unpacking the geni_umf_v3_3pin.rar file creates approximately  200 files (no directories)
30   at the top level.  How does this map to the structure that is in the README.txt?
31
324. When using unrar to unpack the geni_umf_v3_3pin.rar file, there is around
33    a dozen prompt to overwrite existing files.  Why is taking place?
34
35Thanks,
36Luisa
37
38
39On 10/13/2011 10:30 PM, Michael S. Wang wrote:
40> Hi Luisa,
41>
42>     The source code for the ERM project can be found on the GENI ERM wikipage (http://groups.geni.net/geni/wiki/Embedded%20Real-Time%20Measurements).
43>
44>     Under the attachment section, please download the two files:
45>
46>       1. GENI_10_Simulations.zip
47>       2. geni_umf_v3_3pin.rar
48>       
49>      Furthermore, the file ERM_Final_Report_Sep11.docx will provide a summary of the entire project and explanations of the code release.
50>
51>      Please let me know if you need anything else. Thanks!
52>
53> Warm regards,
54> Michael
55>     
56>
57> On Fri, Oct 7, 2011 at 11:35 AM, Keren Bergman <kb2028@columbia.edu> wrote:
58>
59>
60>     Hi Mike,
61>     Please respond to them with the link to our ERM release
62>     -----Original Message-----
63>     From: Luisa Nevers [mailto:lnevers@bbn.com]
64>     Sent: Friday, October 07, 2011 10:28 AM
65>     To: Luisa Nevers
66>     Subject: GENI Integration Release 3.2 Candidates
67>
68>     Hello GENI PI,
69>
70>     You are receiving this email because your project has a software
71>     milestone due within the GENI Spiral 3 Integration Release 2 (GIR3.2)
72>     time frame.  This is the final reminder for GENI Spiral 3.  Make sure to
73>     reply with your software release information if you want to be included
74>     in the GEC12  list of projects that made Spiral 3 software
75>     deliverables.   Please let me know how to access both the software  and
76>     its supporting documentation.
77>
78>     The GIR 3.2 effort focuses on software released after March 31, 2011.
79>     For more information about the GIR efforts, please see
80>     Spiral3_GIR_Guidelines.pdf available at:
81>     http://groups.geni.net/geni/wiki/GpoDoc#GENISpiral3IntegrationReleaseGuideli
82>     nes
83>
84>
85>     For a detailed list of software milestones being considered for GIR3.2,
86>     see the full list at:
87>     http://groups.geni.net/geni/wiki/GIR3_2_candidates
88>
89>     Thank You!
90>     Luisa Nevers
91>
92>
93>
94>
95